13. SETTING UP THE PROJECTOR SCREEN
1. First, find an open space to hang up the projector screen.
2. Unfold the projector screen in clean, clear area. Th
en, measure the distance
between the top corner hole and th
e second top corner hole with a ruler or
measuring tape (not included).
3. Remove the backing from two (2) adhesive hooks an
d press the adhesive of the
hooks on th
e wall for 10 seconds. Make sure to place the hooks the same distance
apart as the top two corner holes of
the projector screen.
4. Pick up the screen and hang it up by putting th
e top corner holes of the screen
over the f
irst two (2) mounted hooks. Make sure you hang up the screen
from top to bottom.
5.
Once the screen is hanging up firmly from the top corner hooks, mount two
more hooks to the wall f
or the bottom two corner holes of the screen.
NOTE: The included adhesive hooks are recommended for hanging the screen, but not
necessary. Feel free to use your own hooks, rope, or any other method for hanging
up the projector screen.
To clean the projector screen, use a washing machine or wash it by han
d.
Then,
hang up the screen to air dry.
To Next Page
Loading...
