Kodak FLIK X10 - MOUNTING THE PROJECTOR; USING THE AUDIO OUT JACK

The KOD
AK FLIK X10 Full HD Multimedia Projector can be placed on a tabletop, set up on
a tripod, or moun
ted up on the ceiling. When placed on a tabletop, use the adjustable
f
oot on the bottom of the projector to elevate the projector at an angle if needed.
When mounting the projector to the tripod or ceiling mount, fasten th
e projector using the
tripod port at the bottom of the projector.
7. MOUNTING THE PROJECTOR
While the projector does include two (2) built-in
speakers for regular use, you can also con
nect
either headphones or a portable speaker to
th
e 3.5 mm Audio Out Jack as shown in
th
e image below.
8. USING THE AUDIO OUT JACK