9
If the image on the screen appears fuzzy or unfocused when you turn the projector on, use the focus
wheel on the top to correct the image. Move the wheel left or right until the image appears sharp and
clear. The dial behind the focus wheel allows you to adjust the viewing angle of the screen.
NOTE: For best performance, the projector must be located a minimum distance of 3.5
feet (1 meter) from the screen. If a speciic image or video remains fuzzy after adjusting
the focus wheel, try pressing the back button until you return to the Main Page. If the Main
Page graphics appear clear and the image is still fuzzy, the problem may be the image or
video quality.
16. ADJUSTING FOCUS
17. ADJUSTING VOLUME
To adjust the device volume during playback, use the < and > buttons on the top of the projector or the
volume buttons on the remote control.
18. ADJUSTING PICTURE SETTINGS
From the Main Page, navigate to Settings and press the OK button to select. Once you are on the
Settings Page, select the top option, “Picture Mode” and use the arrows to navigate through the preset
options. The inal option “User” allows you to personally customize the brightness and other
picture settings.
To Next Page
Loading...
Need help?
General
