12
Adjusting focus
1. Move the focus slider to adjust the clarity of the
projected image.
2. Stop moving the slider once the projected image
becomes clear.
Turning off the projector
1. Before turning off the projector, close any les that are being displayed.
2. Press and hold the power button for three seconds to turn off the
projector.
Resetting the projector
In case the projector acts erratically and/or the system crashes, please press
the reset hole (located on the bottom of the projector) with a ne-like object (a
paper-clip) to reset the projector. The projector will shut down and restart to
the normal state.
To Next Page
Loading...
