Do more with your camera
18 www.kodak.com/go/support
Use the self-timer
Use the self-timer when you want to be included in a picture or
to ensure a steady Shutter button press. For best results, place
the camera on a tripod or steady surface.
1 Press the Display button until tools appear at the top of
the LCD.
2 Press and to choose the Self-timer/Burst icon, then
press OK.
3 Press to choose a self-timer setting, then press OK.
4 Compose the scene. Press the Shutter button halfway, then
completely down.
The camera takes the picture/pictures after the delay.
You can use the same procedure to take a video (after a 2- or
10-second delay).
Self-timer setting Description
10 Seconds A picture is taken after a 10-second delay (so
you have time to get into the scene).
2 Seconds A picture is taken after a 2-second delay.
2 Picture
Timer
The first picture is taken after a 10-second
delay. A second picture is taken 8 seconds
later.
urg_01202.book Page 18 Monday, November 29, 2010 8:13 AM
To Next Page
Loading...
