22 www.kodak.com/go/support
2 Solve camera problems
Go to www.kodak.com/go/M532support for the Extended user
guide, firmware updates, and answers to your questions.
Status Solution
Camera does not
turn on/off or function
■ Make sure the battery is installed
correctly and charged (see page 3).
LCD is too dark. ■ Adjust the LCD Brightness setting in the
Settings menu (see page 11).
Short battery life ■ Make sure the battery is charged (see
page 3).
■ Limit the time you review pictures/videos
on the camera LCD.
■ Purchase a spare battery at
www.kodak.com/go/accessories.
Flash does not fire ■ The flash does not fire in all modes.
Change modes as needed (see page 17).
Computer does not
communicate with
the camera
■ Turn the camera off, then back on.
■ Make sure the battery is installed
correctly and charged (see page 3).
■ Make sure a KODAK Camera USB Cable,
Micro B / 5-Pin is connected to the
camera and the computer (see page 15).
Then turn on the camera.
■ See KODAK Software Downloads at
www.kodak.com/go/camerasw.
urg_01202.book Page 22 Monday, November 29, 2010 8:13 AM
To Next Page
Loading...
