2
INTRODUCTION
This off-grid PV inverter can provide power to connected loads by utilizing PV power, utility power and battery
power.
Figure 1 Basic PV System Overview
Depending on different power situations, this inverter is designed to generate continuous power from PV solar
modules (solar panels), battery, and the utility. When MPP input voltage of PV modules is within acceptable
range (see specification for the details), this inverter is able to generate power to feed the grid (utility) and
charge battery. Galvanic isolation designed between PV/DC and AC output, so that user could connect any type
of PV array to this inverter. See Figure 1 for a simple diagram of a typical solar system with this inverter.
To Next Page
Loading...
