43
Flash Mode
The Flash is used to illuminate a subject in
low light or for fill-in lighting to achieve better
illumination of a subject with pronounced
shadows.
1. Press the Flash Button to pop up the
flash.
2. Press the right arrow button ( ) to enter
the Flash Settings Menu.
ܠ昘旅
⥺斿Ұ
Force Off
3. Press the left/right to select the following
6 modes:
• Force Off
Flash is turned off.
• Flash Auto
Camera flash goes off
automatically based on existing
light conditions.
• Force Flash
The flash will engage with each
shot even if there is enough
available light to take the photo
without flash.
• Slow Sync.
This allows for night scenery
photos that include people in the
foreground. The use of a tripod
is recommended when shooting
with this setting.
• Slow Sync. + Red-Eye
Use this mode for slow synchro
shots with red-eye reduction.
• Red-Eye Reduction
The camera emits a brief pre-
flash before the picture is taken
to reduce red-eye effects.
4. Press the button to confirm the
settings and exit the option.
1
2
To Next Page
Loading...
