Kodak PIXPRO AZ425-WH

35
• For setting under other modes (use this method to select a different custom setting):
1. Select any mode to be stored and set your desired parameters in the current mode.
2. Press the button, press the [ ] / [ ] buttons to select and press the button to
enter the menu. Press the [ ] button to select [Custom Settings] and press the / [ ]
button to enter the menu afterwards.
Custom Settings
Face Detection O
Custom Settings
Reset camera settings to
custom settings mode.
Yes
No
3. Select [Yes] to save or [No] to cancel.
4. Turn the mode dial to switch to the custom settings ( ).
5. The photo settings you stored the last time are invoked.
When the mode is used for the irst time, there is no preset parameter stored in the mode.
If you want to remove the parameter setting of [Custom Settings], please see the reset function on page
62 to operate.