35
• For setting under other modes (use this method to select a different custom setting):
1. Select any mode to be stored and set your desired parameters in the current mode.
2. Press the button, press the [ ] / [ ] buttons to select and press the button to
enter the menu. Press the [ ] button to select [Custom Settings] and press the / [ ]
button to enter the menu afterwards.
Custom Settings
Face Detection O
Custom Settings
Reset camera settings to
custom settings mode.
Yes
No
3. Select [Yes] to save or [No] to cancel.
4. Turn the mode dial to switch to the custom settings ( ).
5. The photo settings you stored the last time are invoked.
When the mode is used for the irst time, there is no preset parameter stored in the mode.
If you want to remove the parameter setting of [Custom Settings], please see the reset function on page
82 to operate.
To Next Page
Loading...
