Kodak Pixpro FZ102 - Page 21

20 2120 21
Resetting Date/Time
After you set your Date/Time for the irst
time, follow the instructions below to
reset date and time.
1. Press the button and press the up/
down button to select . Press the
button to enter the menu.
2. Press the up/down button to select
and press the button or right button
to enter the menu.
3. Press the up/down button to select
[Date & Time] and press the button
or right button to enter the menu.
4. Press the left/right button to select
the Date/Time to be adjusted: Time is
displayed in YYYY.MM.DD/HH:MM.
5. Press the up/down button to press the
value for your selected entry. After
you inish your settings, press the
button to conirm.
6. Press the button and the following
snapshot screen will appear.