Kodak Pixpro FZ102 - Flash Mode

32 33
Flash Mode
The lash provides supplemental light for
the scene. The lash is usually used when
shooting against the light to highlight the
object; it is also suitable for metering and
shooting in darker scenes to improve the
exposure.
1. Pop up the lash manually as shown
below (as shown in the igure).
2. Press the right button ( ) to enter the
lash settings menu.
3. Press the left/right button to select one
of the following 6 modes:
•
Force O
Flash is turned o.
•
Flash Auto
Camera lash goes o
automatically based on existing
light conditions.
•
Fill Flash
The lash will engage with each
shot even if there is enough
available light to take the photo
without lash.
•
Slow Sync.
This allows you to take pictures
of people at night that clearly
show both your subjects and the
night time backdrop. The use of
a tripod is recommended when
shooting with this setting.
•
Slow Sync. + Red-Eye
Use this mode for slow synchrony
shots with red-eye reduction.
•
Red-Eye Reduction
The camera emits a brief pre-
lash before the picture is taken
to reduce red-eye eects.
4. Press the button to conirm the
settings and enter the shooting screen.