Kodak Pixpro FZ102 - Connecting to PICTBRIDGE Compatible Printers

70 7170 71
Connecting to a PICTBRIDGE Compatible Printer
PICTBRIDGE technology allows printing
of the photos saved in the memory card
by the printer.
To ind out if a printer is PICTBRIDGE
compatible, simply look for the
PICTBRIDGE logo on the packaging
or check the owner's manual for
speciications. With the PICTBRIDGE
function on your camera, you can
print the captured photos directly to a
PICTBRIDGE compatible printer using
the supplied Micro USB cable, without the
need for a PC.
Setting the USB Mode
The camera’s USB port can be set to
connect with either a PC or a printer.
The following steps will ensure that the
camera is correctly conigured to connect
with a compatible printer.
1. Press the button, press the up/down
button to select and press the
button to enter the menu.
2. Press up/down button to select and
press the button or right button to
enter the menu.
3. Press the up/down button to select
[USB] and press the button or right
button to enter the menu.
4. Press the up/down button to select
[Printer] and press the button to
conirm.
After the camera is reset, it will
switch to PC mode automatically
from USB mode.
See “Using the PICTBRIDGE Menu“
section on page 73.
™
™
™
™
™
™
™