71
Connecting to a PictBridge Compatible Printer
PictBridge technology allows printing of the
photos saved in the memory card by the
printer.
To find out if a printer is PictBridge compatible,
simply look for the PictBridge logo on the
packaging or check the owner's manual for
specifications. With the PictBridge function on
your camera, you can print the captured photos
directly to a PictBridge compatible printer
using the supplied Micro USB cable, without
the need for a PC.
Setting the USB Mode
The camera’s USB port can be set to connect
with either a PC or a Printer, the following
steps will ensure that the camera is correctly
configured to connect with a Printer.
1. Press the button, press the up/down
button to select and press the
button to enter the menu.
2. Press up/down button to select and
press the button or right button to enter
the menu.
3. Press the up/down button to select「USB」
and press the button or right button to
enter the menu.
4. Press the up/down button to select
「Printer」and press the button to
confirm.
After the camera is reset, it will switch to
PC mode automatically from USB mode.
See “Using the PictBridge Menu“ section
on page 73.
To Next Page
Loading...
