Kodak PIXPRO SP360 - Page 38

37
Waterproof Housing: For use with other accessories underwater, in rain, on the seashore, or in other circumstances where waterproong is
required
Installation method:
1. First, insert the adapter into the bottom of the waterproof
housing before using the set screw for tightening.
2. RemovetheActionCam'sglass lens cover , place the Action Cam into the waterproof housing,
put in the anti-fog inserts, and press the lock downward until it locks tightly.
BeforeusingtheActionCaminawetenvironment,pleasebesuretoputitinsidethewaterproofhousingrst.Also,itshouldnotbesubmergedtoadepthgreater
than 60 m (196 feet) underwater.
Anti-fog inserts absorb moisture. Please make sure it is dry before use (heat it in a 150°C oven for around 5 minutes). Each anti-fog insert can be reused up to 4
times.
Set screwAdapter
Anti-Fog InsertsLock