Kodak Retina IIc User Manual

Focusing
Hold the camera in the picture-taking position
and look through the eyepiece. You will see the
subject outlined by the luminous view-frame. In
the center of the field of view you will also notice
a diamond-shaped rangefinder field. Until the cam-
era is focused for the correct distance, this field
shows a double image of the subject. To set the
distance correctly turn the focusing knob until the
outlines of the double image move together and
coincide, so that only one image is visible. The lens
is now accurately set for the 'film plane·x·-to-subject
distance. Practice focusing in this way with vari-
ous subjects at different distances-close the cam-
era now and then, and pretend that you have just
noticed a good subject and want to focus the cam-
era on it. Open the camera and focus quickly. Prac-
tice with the camera held in both the vertical and
horizontal positions.
*The fl lm plane location corresponds to the rear top edge of the camera.
17

Kodak Retina IIc Specifications

General

Brand	Kodak
Model	Retina IIc
Category	Digital Camera
Language	English