Kodak Retina IIc User Manual

Synchronization. Speed Settings
There are three letters engraved on the block of
the flash post ; M and X are synchronizer settings
for flash, V is the self-timer setting. (See page 33.)
These settings are adjusted by the SELECTOR lever.
Using Class F Lamps, such as SM or SF - Set the
synchronizer selector pointer on X (pointer in
illustration is set at M), set the shutter speed at
any speed from 1 to 1/125 second, and consult the
table on page 33 for exposure information.
Using Class M Lamps, such as No.5, No. 25 , or
No. B -Set the synchronizer selector pointer on M
for shutter speeds from 1 to 1/500. See the table
on page 33 for exposure information.
Using Electronic Flash - Set the synchronizer se-
lector pointer on X. With electronic flash equip-
ment having no lag in the trip circuit, set the shut-
ter at any speed from 1 second to 1/500 second.
NOTE. Do not u;e units flashed by means
of heavy-duty relays or solenoids. Such
units may completely destroy the shutter
contacts.

Kodak Retina IIc Specifications

General

Brand	Kodak
Model	Retina IIc
Category	Digital Camera
Language	English