Kodak Retina IIc User Manual

SeHing the Focusing Scale
In addition to using the coupled rangefinder to
determine distance automatically, you can also set
the FOCUSING SCALE (for 50mm lens) manually.
The small red dot next to the FOCUSING INDEX is
to be used instead of the focusing index when
focusing with Infrared Film. Therefore, turn the
focusing knob until the figure corresponding to
the film plane-to-subject distance is opposite the
red dot when using Infrared Film.
The bottom of the focusing ring carries three
other scales. These are for use with the inter-
changeable lenses which are described on page 34.
Depth of Field
After you have properly focused on your subject :
the subject will be sharp in the picture. However,
other objects in the picture area, both in front of
and behind the subject, will also be in focus. This
is "range of sharpness" or "depth of field."
24

Kodak Retina IIc Specifications

General

Brand	Kodak
Model	Retina IIc
Category	Digital Camera
Language	English