A-61734 March 2012 15
Image Edge Fill tab The Image Edge Fill tab provides the following options.
Image Edge Fill — fills the edges of the final electronic image by
covering the area with the specified color.
NOTE: When using Image Edge Fill, be careful not to enter a value too
large as it could fill in image data that you want to keep.
• Fill Color: allows you to select the color to fill the edges with.
- (none)
-White
-Black
• Frame Mode — fills in an equal amount of the selected color from
the Fill Color drop-down list on all sides of the image, or you can
select a value in the Left, Right, Top and/or Bottom area(s) from
each side of the scanned image to be filled.
To Next Page
Loading...
