EasyManua.ls Logo

Kodak ScanMate i940 - Scanner Maintenance

Kodak ScanMate i940
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-61766 October 2012 19
Maintenance
This section provides procedures for cleaning the scanner and replacing
consumables.
Your scanner needs to be cleaned periodically. If your documents do not
feed easily, if several documents feed at the same time or if streaks
appear on your images, it is time to clean your scanner. The section
entitled “Supplies and consumables” later in this chapter, provides a
listing of the supplies required to clean your scanner.
IMPORTANT: Use only cleaners such as those provided through Kodak
Parts Services. Do not use household cleaners.
Do not use air, liquid or gas spray cleaners.
Allow surfaces to cool to ambient temperature before use.
Do not use cleaners on hot surfaces.
Use adequate ventilation. Do not use cleaners in confined
areas.
1. Disconnect the power from the scanner before performing cleaning
procedures.
2. Open the top cover.

Related product manuals