Kodak ThermoFlex Wide II - Site Requirements; Footprint and Working Area

Site Requirements 9
Site Requirements
Footprint and Working Area
See Figures 2-3 for the recommended work area and dimensions. For operator and
service access, leave at least 1067 mm (42 in.) clearance at the front of the device,
and 910 mm (36 in.) clearance at the sides of the device.
The customer should provide an area close to the device for storing media (for
immediate use), disks, paperwork, and so on.
Note: The workstation, debris removal cabinet, drum vacuum pump, and external chiller
must not intrude into the service clearance zone around the perimeter of the output
device.
Figure 2: Top view of ThermoFlex Wide II work area
914
36
914
36
1067
42
1067
42
2572
101
7000
276
4028
159
5169
203
1483
58
1453
57
[in.]
mm