2 ThermoFlex Wide II Site Preparation Guide
Equipment Overview
The device consists of the following standard components:
• Plate recording output device
• Very high power 2400 dpi thermal imaging head
• Drum vacuum system
• Debris removal system
1
and thermal head cooling systems
Plus the following options:
• Sleeve capability, including the Quick Change Drum Exchange System
• One universal sleeve arbor
• Sleeve toolkit (hardware and software)
• Sleeve load/unload production hub
• “One-touch” semi-automatic sleeve load/unload system, including modified
processor shafts
• Sleeve transport cart
1. The debris removal system consists of a vacuum pump and filtration system for
removing debris from exposed media. Refer to the UDRC Site Preparation Guide
(part number 725-00089A).
To Next Page
Loading...