Need help?Do you have a question about the Koden KGP-913 and is the answer not in the manual?
General| Channels | 12 |
|---|---|
| SBAS | Yes |
| Interface | NMEA0183 |
| Receiver Type | GPS |
| Update Rate | 1/sec |
| Accuracy | 3m (2D RMS) |
| Display | LCD |
Explains GPS accuracy, PDOP, and DGPS correction benefits.
Identifies display components and explains the function of each control panel key.
Describes different screen layouts (NAV1-3, PLOT) and data modes (OFF, WPT, RTE, ANCW).
How to read position data and store present positions as events.
Activating MOB for emergencies and understanding the MOB screen.
Retrieving stored data and switching between speed and VMG displays.
Steps to prepare for waypoint and route navigation.
How to enter waypoint coordinates and add descriptive comments.
Procedures for managing waypoint data storage.
How to start waypoint navigation and recheck waypoint details.
Procedures for quick WPT setup, reentering origin, and canceling navigation.
Using the NAV2 navigation graph and adjusting its range.
Steps to store routes and the modes for automatic waypoint switching.
Procedures for deleting individual points or entire routes.
How to start route navigation and set the current position as the origin.
Procedures for checking route points, skipping them, and canceling navigation.
How to switch the display between distance and time to go metrics.
Procedures for setting, recalling, and removing anchor positions.
Explains different types of alarms and their triggers.
Details on Cross Track Error (XTE) and Course Deviation Indicator (CDI) alarms.
Guide to setting, changing ranges, and canceling various alarms.
Calculating distance and bearing between two stored points.
Resolving issues related to power, display, and error messages.
To Next Page
