To Next Page
J
Jennifer ClarkSep 6, 2025
What does 'Nav line exceeded' mean on my Koden Marine Radar?
- JJesse SimonSep 6, 2025
If your Koden Marine Radar displays 'Nav line exceeded,' it means your own ship crossed the Nav line.
What does 'Nav line exceeded' mean on my Koden Marine Radar?
If your Koden Marine Radar displays 'Nav line exceeded,' it means your own ship crossed the Nav line.
Why is COG/SOG unavailable on my Koden MDC-7000P?
If your Koden Marine Radar shows 'COG/SOG is unavailable,' this indicates that the COG/SOG data is not being inputted.
Why is HDG unavailable on my Koden Marine Radar?
If your Koden Marine Radar displays 'HDG is unavailable,' it means that THS or HDT signals are not being inputted.
What does 'Antenna magnetron current abnormal' mean on my Koden Marine Radar?
If your Koden Marine Radar displays 'Antenna magnetron current abnormal,' the magnetron may be at the end of its life, or the transmission high voltage fuse may be blown.
What does 'Received AIS message' mean on my Koden Marine Radar?
If your Koden Marine Radar displays 'Received AIS message,' it means the unit received an AIS message to OWN ship.
Why does my Koden Marine Radar display 'Change to reference antenna'?
If your Koden Marine Radar displays 'Change to reference antenna,' it means the set CCRP went beyond the radar display, and the reference has moved to the antenna position.
What does 'Tracked targets overload (95%)' mean on Koden MDC-7000P?
If your Koden Marine Radar displays 'Tracked targets overload (95%),' it means the number of tracking targets has exceeded 95.
What does it mean when a tracked target exceeded the CPA/TCPA limit on my Koden MDC-7000P?
If your Koden Marine Radar displays 'Tracked target exceeded the CPA/TCPA limit,' it means a tracked target has turned into a dangerous target.
What does 'Antenna magnetron heater abnormal' mean on my Koden MDC-7000P?
If your Koden Marine Radar displays 'Antenna magnetron heater abnormal,' there might be something wrong with the magnetron or the scanner unit.
What does 'AIS no OS COG/SOG data' mean on Koden MDC-7000P?
If your Koden Marine Radar displays 'AIS no OS COG/SOG data,' it means that the own ship’s data necessary for AIS is not being input.
General| Brand | Koden |
|---|---|
| Model | MDC-7000P series |
| Category | Marine Radar |
| Language | English |
Safety precautions for antenna rotation, radio waves, and high voltage exposure.
Safety guidelines for maintenance, including handling high voltage and dust.
Procedures for installing the antenna scanner unit, including mounting and dimensions.
Methods for installing the display unit, including tabletop and panel flush mounting.
Procedures for installing the operation unit, including tabletop and flush mounting.
Accessing and using MAINTENANCE and STARTUP menus for system adjustments and settings.
Setting up input/output interfaces for connecting sensors and external data sources.
Procedures and flowcharts for diagnosing and resolving common radar malfunctions.
Instructions for replacing fuses and internal batteries.
