Need help?Do you have a question about the Koden MDC-7010 and is the answer not in the manual?
General| Brand | Koden |
|---|---|
| Model | MDC-7010 |
| Category | Marine Radar |
| Language | English |
Lists the components and part numbers for the MDC-7060/7010/7020 and MDC-7960/7910/7920 models.
Explains the different areas of the radar display screen, including upper/lower corners and data areas.
Identifies and describes the function of each key and knob on the radar's operating unit.
Provides instructions on how to navigate and use the radar's menu system for various settings.
Details the procedure for turning the radar system on and off, including preheating and shutdown.
Explains how to switch the radar between standby and transmit modes using keys or trackball.
Covers manual and automatic tuning methods to optimize radar performance against environmental changes.
Guides on adjusting receiver gain manually or automatically for optimal target detection.
Details the manual and automatic adjustment of sea clutter suppression for clearer radar images.
Explains how to use manual and CFAR adjustments to suppress rain and snow clutter.
Explains how to select display modes combining bearing indication and target motion (Head up, Course up, North up).
Covers selecting stabilization modes (Ground or Sea) for movement calculations like True trail and TT.
Details how to measure target distance using Range Rings (RR) and Variable Range Markers (VRM).
Explains how to measure target bearing using Electronic Bearing Lines (EBL1 and EBL2).
Explains how to display target trails in relative or true modes, and configure trail settings.
Explains how to assign and use the six dedicated function keys for quick access to features.
Explains the Echo alarm function, including setting fan-type alarm areas and detection levels.
Details how to set up Map area alarms for targets entering or leaving defined areas.
Describes the Guard zone alarm system for TT (ARPA) or AIS targets entering a protected zone.
Covers common settings for target vectors (REL/TRUE), time, stabilization, and path indicators.
Explains AIS functionality, including target symbols, filters, and data display options.
Details TT (ARPA) functions for collision avoidance, including limitations and acquisition methods.
Guides on backing up and restoring radar setup data to internal memory or SD card.
Provides a procedure to troubleshoot issues with the radar's alarm sound system.
Details a test procedure for the operation unit to diagnose malfunctioning keys or knobs.
Guides on troubleshooting when TT (ARPA) acquisition does not start, checking input range and HDG.
Provides steps to diagnose issues when AIS data is not displayed, checking input range and connections.
Explains how to confirm serial input from various connectors using the serial monitor function.
Details procedures to diagnose issues when no radar video (Echo) is displayed on the screen.
Provides steps to troubleshoot a frozen display phenomenon where video or cursor is unresponsive.
Explains the types of alarms, warnings, and cautions displayed, and how to confirm them.
To Next Page