Koden MDC-7010 - How to Delete; How to Clear

Chapter 6 Map operation MDC-7000/7900 Series
0093169010-10
6-8
1-1
1-2
1-3
1-4
1-5 1-6
1-1
1-2
1-3
1-4 1-5
Press
ENT key
How to delete
1-1 1-2
1-3
1-4
1-5
1-6
Cursor
How to delete
(1) CURSOR OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [DELETE] => [CURSOR] => select [1 to 10] => [GO] and press
ENT key. Numerical number is displayed each points of coast line.
2 Move cursor on the position deleting.
Press ENT key. Selected coast line data will be deleted.
(2) BLOCK NUMBER OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [DELETE] => [BLOCK NUMBER] => select [1 to 10] =>
Following delete menu is displayed.
2 Select [NUMBER] => NUMBER data screen is displayed. => select [1 to 100] =>
Press ENT key. Selected number’s numerical data is shown.
3 Select [SET], and press ENT key to delete selected data.
How to clear
All data of selected block number are cleared.
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [CLEAR] => [BLOCK NUMBER] => select [1 to 10] => select
[GO], and press ENT key.
NUMBER 4
LAT 35˚ 15.368N
LON 139˚ 51.129E
SET