Koden MDC-7010 - Option List

Configuration items MDC-7000/7900 Series
0093169010-10
xx
Option list
No.
Name
Type
Comment
1
Gyro Interface
S2N, U/N 9028C
Gyro converter
2
Log pulse NMEA
converter
L1N, U/N 9181A
200pulse/NM only
3
Rectifier unit
PS-010
5A fuse attached.
4
VL-PSG001
20A fuse attached.
5
AC power cable
VV-2D8-3M
Without a connector on the both sides
6
Junction box
JB-35
With CW-376-5M
7
Connecting
cable
CW-373-*
*: 5M, 10M, 30M
With 6-pin water resistant connectors at both
ends (cable for data)
8
CW-374-5M
With a 6-pin connector and a 6-pin water
resistant connector (cable for data)
9
CW-376-5M
With a 6-pin water resistant connector and one
end plain (cable for data)
10
CW-387-5M
With a 8-pin water resistant connector and one
end plain (cable for AIS)
11
CW-561-*
*: 10M, 30M
With 12-pin water resistant connectors at both
ends (cable for remote display)
12
CW-576-0.5M
With a 10-pin water resistant connector and
D-Sub connector (analog RGB)
+Alarm out
13
Operation unit
connecting cable
CW-401-*
*: 5M, 10M
With connectors on both sides
14
Antenna unit –
Display unit
connecting cable
242J159098C-20M
With connectors on both sides
15
242J159098D-30M
With connectors on both sides
16
242J159098x-xxM
xx: 100 m max
With a connector on the both sides