Koden MDC-7010 - 2.16 Measurement distance;bearing by ERBL

MDC-7000/7900 Series Chapter 2 Radar Basic Operation
0093169010-10
2-29
4 Turning EBL knob changes the bearing of a selected line.
Note: Turning EBL knob (while pressing it) changes the bearing quickly.
ClockwiseCounter
clockwise
EBL knob
PI 1/4
000.0°
3.000NM
PI REL 1/4
5 To return all PI lines to original position, press VRM knob while pressing OFF key.