steam outlet several times with a needle around 1mm in diameter. Finally, press the
coffee/steam button and turn on the steam knob to check if the appliance can produce
steam normally when the steam indicator (green) illuminates. Please contact Kogan.com if
the appliance cannot produce steam after operated as above.
Note: After steaming, allow the maker to cool down at least for 5 minutes before making
coffee again, otherwise a burnt odour may be noticeable in prepared coffee. If you want to
make coffee immediately: press and release the steam button and dip the steam wand into
a cup. Press the pump control button down and turn on the steam control knob; water will
flow out from steam wand. After the ready indicator dims, press and release the pump
control button, then turn the steam control knob to “O” position. When the ready indicator
illuminates, the appliance is prepared for making coffee once again.
To Next Page
Loading...