Outlet HEPA filter
Access the outlet filter by pressing the button
to open the latch. This will allow you to clean
or replace the outlet HEPA filter.
Dust cup
Twist the dust cup while holding onto the
body of the vacuum cleaner to open.
When re-fitting, ensure the markings on
the dust cup align with the body.
Emptying dust cup
Clear out the dust and clean the
filters. Use a brush to remove dust and
debris from the components – do not
wash the HEPA filter.
Roller brush
The roller brush can be ejected from the brush
head for detailed cleaning or replacement.
Remove the cover and press the switch to
release the roller brush.
To Next Page
Loading...
