EasyManua.ls Logo

Kohlangaz delamere - User Manual

Default Icon
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Delamere
INSET RADIANT FUEL EFFECT GAS FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the owner following installation, they
must be retained for future reference.
Model No’s HRDC**MN2 & HRDC**SN2 are for use on Natural Gas
(G20) at a supply pressure of 20 mbar in G.B. / I.E.
** denotes variant of trim / fascia where applicable
Question and Answer IconNeed help?

Do you have a question about the Kohlangaz delamere and is the answer not in the manual?

Summary

SECTION 1 INSTALLATION REQUIREMENTS

APPLIANCE INFORMATION AND SPECIFICATIONS

Key details about the gas fire model, its type, and technical specifications.

CONDITIONS OF INSTALLATION

Legal, regulatory, and building requirements for safe installation.

FLUE AND CHIMNEY SUITABILITY

Requirements for chimney types, dimensions, and testing for gas fires.

FIREPLACE; SURROUND SUITABILITY

Guidelines for fireplace, hearth, and surround materials and dimensions.

SHELF POSITION

Specifies minimum clearance distances for shelves above the fire.

FLUE; CHIMNEY INSPECTION

Steps for inspecting the chimney or flue before installation.

FIRE PLACE OPENING AND CHIMNEY CATCHMENT SPACE

Defines required dimensions for the fireplace opening and debris collection.

SPECIFIC INSTALLATION SCENARIOS

Guidelines for fitting into metal flue boxes, pre-cast flues, and hearth details.

SPILLAGE MONITORING SYSTEM

Information on the fire's spillage monitoring system and associated warnings.

SECTION 2 INSTALLATION OF FIRE

UNPACKING AND FIRE BOX INSTALLATION

Steps for unpacking the appliance and installing the main firebox.

GAS TIGHTNESS AND INLET PRESSURE CHECKS

Procedures for gas connection, tightness testing, and pressure checks for both models.

SECTION 3 ASSEMBLING FUEL BED AND COMMISSIONING

ASSEMBLING COAL AND PEBBLE FUEL BEDS

Step-by-step guides for arranging coal and pebble effect fuel bed components.

FITTING TRIMS, FENDERS, AND LIGHTING THE FIRE

Instructions for fitting decorative elements and initial lighting procedures.

CHECKING COMBUSTION PRODUCT CLEARANCE

Procedure to ensure safe venting of combustion gases.

SECTION 4 MAINTENANCE PROCEDURES

BURNER AND IGNITER COMPONENT REPLACEMENT

Steps for removing/replacing burner assembly, piezo igniter, and battery ignitor.

CONTROL AND SAFETY COMPONENT REPLACEMENT

Procedures for replacing control tap, oxy-pilot assembly, and control cable.

BATTERY REPLACEMENT AND CONTROL CABLE ADJUSTMENT

Guide for battery replacement and control cable tensioning/adjustment.

PARTS SHORTLIST

FRET INFORMATION

Dimensions and cleaning guidelines for decorative frets.

SECTION FIVE USER INSTRUCTIONS

INSTALLATION AND SAFETY GUIDELINES

User-focused installation summary and crucial safety warnings.

OPERATING THE FIRE (MANUAL & SLIDE CONTROLS)

Step-by-step guides for lighting and operating the fire for both control types.

CLEANING AND FUEL BED REASSEMBLY

Guidelines for cleaning the appliance and reassembling fuel beds.

USER REPLACEABLE PARTS

REPLACEMENT COAL;PEBBLE SETS

Information on ordering replacement fuel bed components and contact details.

Kohlangaz delamere Specifications

General IconGeneral
BrandKohlangaz
Modeldelamere
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals