EasyManua.ls Logo

Kohlangaz Gosford - User Manual

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Gosford
INSET LIVE FUEL-EFFECT GAS FIRES
Installation and Maintenance Instructions
Hand these instructions to the owner following installation, they
must be retained for future reference.
Model No’s HICC**MN2 & HICC**SN2 are only for use on Natural Gas
(G20) at a supply pressure of 20 mbar in G.B. / I.E.
Model No’s HICC**MP & HICC**SP are only for use on Propane Gas
(G31) at a supply pressure of 37 mbar in G.B. / I.E.
** denotes trim and fret variant fitted to product
Question and Answer IconNeed help?

Do you have a question about the Kohlangaz Gosford and is the answer not in the manual?

Summary

Section 1 Information and Requirements

Appliance Information

Details specifications like Model, Gas Type, Injector, Pilot Type, Heat Input, Pressure, Ignition, Gap, Weight.

Fire Box Dimensions

Specifies width, height, and depth dimensions for the firebox installation.

Efficiency Declaration

States the appliance's efficiency as measured by BS 7977-1:2002, resulting in 58%.

Conditions of Installation

Covers legal requirements for installation by a GAS SAFE registered installer and compliance with standards.

Flue and Chimney Suitability

Outlines requirements for flue types and minimum dimensions for safe operation.

Fireplace and Surround Suitability

Details requirements for hearths, non-combustible surrounds, and clearances.

Shelf Position Requirements

Specifies minimum distances for combustible shelves above the fire.

Flue and Chimney Inspection

Provides steps for inspecting the flue/chimney for obstructions, cleanliness, and integrity.

Fireplace Opening and Catchment Space

Defines minimum and maximum dimensions for the fireplace opening and catchment space.

Installation Depth Requirements for Brick Chimneys

Table detailing minimum required depth based on opening width for brick chimneys.

Fitting to Pre-fabricated Twin Wall Metal Flue Boxes

Covers requirements for fitting the appliance to metal flue boxes, including dimensions.

Hearth Requirements

Specifies hearth material, thickness, height, width, and projection.

Spillage Monitoring System

Explains the safety function of the oxygen sensing pilot and its warnings.

Section 2 Installation of Fire

Unpacking the Fire

Instructions for carefully removing the fire from the carton and checking contents.

Installing the Fire Box

Covers fitting the fire box into various flue types and the use of restrictor baffles.

Gas Tightness and Inlet Pressure (Manual Control Models)

Procedure for checking gas tightness and inlet pressure for manual control models.

Gas Tightness and Inlet Pressure (Slide Control Models)

Procedure for checking gas tightness and inlet pressure for slide control models.

Section 3 Assembling Fuel Bed and Commissioning

Assembling the Ceramics and Fuel Bed

Step-by-step instructions for placing the ceramic fuel bed and coals.

Fitting the Trim or Contemporary Fascia

Instructions for attaching the trim or fascia using magnets.

Fitting the Fender

Instructions for positioning the fender and ashpan.

Lighting the Appliance (Manual Control Models)

Detailed procedure for lighting the fire using manual controls.

Lighting the Appliance (Slide Control Models)

Detailed procedure for lighting the fire using slide controls.

Checking for Clearance of Combustion Products

Procedure for performing a smoke test to ensure safe flue gas clearance.

Section 4 Maintenance

Servicing Notes

General guidance on annual servicing requirements by a qualified professional.

Removing the Burner Assembly (Manual Control Models)

Step-by-step guide for removing and refitting the burner for manual models.

Removing the Piezo Igniter

Procedure for removing and refitting the piezo igniter.

Removing the Control Tap

Steps for removing and refitting the control tap.

Removing the Oxy-Pilot Assembly (Section 4.4)

Instructions for removing and replacing the Oxy-Pilot assembly.

Removing the Burner Assembly (Slide Control Models)

Step-by-step guide for removing and refitting the burner for slide models.

Removing the Battery Ignitor

Procedure for removing and refitting the battery ignitor.

Replacing the Battery

Instructions for replacing the battery in the ignitor.

Removing the Oxy-Pilot Assembly (Section 4.8)

Instructions for removing and replacing the Oxy-Pilot assembly.

Replacing the Control Cable

Detailed procedure for replacing the control cable.

Kohlangaz Gosford Specifications

General IconGeneral
BrandKohlangaz
ModelGosford
CategoryIndoor Fireplace
LanguageEnglish

Related product manuals