What to do if the starter or starter solenoid is inoperative on my Kohler 28EFKOZD Portable Generator?
If the starter or starter solenoid is inoperative on your Kohler Portable Generator, replace the starter or starter solenoid. The cause is an inoperative starter/starter solenoid.
What to do if there is air in the fuel system of my Kohler 28EFKOZD Portable Generator?
If there is air in the fuel system of your Kohler Portable Generator, bleed the diesel fuel system. The cause is air in the fuel system.
How to replace a fuse on a Kohler 28EFKOZD?
To replace a fuse on your Kohler Portable Generator, use fuses of the same ampere rating and type (for example: 3AB or 314, ceramic). Do not substitute clear glass-type fuses for ceramic fuses.
How to fix a faulty ground connection on my Kohler 28EFKOZD?
If you find a faulty ground connection in your Kohler Portable Generator, clean and retighten the connection. The cause is a faulty ground connection.
What to do if the transfer switch test switch is in the OFF position on my Kohler 28EFKOZD?
If the transfer switch test switch is in the OFF position on your Kohler Portable Generator, move the transfer switch test switch to the AUTO position. This is because the transfer switch test switch is in the OFF position.
How to secure a loosely installed exhaust system on my Kohler 28EFKOZD?
If the exhaust system of your Kohler Portable Generator is not securely installed, inspect the exhaust system and tighten any loose components. This is because the exhaust system is not securely installed.
How to fix an exhaust system leak on my Kohler 28EFKOZD Portable Generator?
If you discover an exhaust system leak in your Kohler Portable Generator, inspect the exhaust system and replace any inoperative exhaust system components. This is because there is an exhaust system leak.
What to do if my Kohler Portable Generator shuts down due to low oil pressure?
If your Kohler Portable Generator experiences a low oil pressure shutdown, check the oil level. This is due to low oil pressure shutdown.
What to do if my Kohler 28EFKOZD is experiencing an engine overload?
If your Kohler Portable Generator experiences an engine overload, reduce the electrical load. The cause is engine overload.
How to fix loose or corroded battery connections on a Kohler Portable Generator?
If the battery connections of your Kohler Portable Generator are loose, corroded, or incorrect, verify that the battery connections are correct, clean, and tight. The cause of this problem is that the battery connections are loose, corroded, or incorrect.
General| Model | 28EFKOZD |
|---|---|
| Type | Portable Generator |
| Fuel Type | Gasoline |
| Frequency | 60 Hz |
| Running Watts | 28, 000 Watts |
| Voltage | 120V |
| Warranty | 3 years |
| Power Output | 28 kW |
| Starting System | Electric |
Outlines DANGER, WARNING, CAUTION, NOTICE definitions and general safety rules.
Details hazards like accidental starting, fire, exhaust, fuel, noise, and voltage.
Explains voltage regulation, selector switches, and paralleling operation settings.
Covers fault diagnostics, status lamps, error handling, and controller reset procedures.
Provides detailed maintenance schedules for different generator set models and intervals.
Provides a structured reference for diagnosing common generator set problems and their causes.
To Next Page
