Need help?Do you have a question about the Kohler 30RCLA and is the answer not in the manual?
General| Model | 30RCLA |
|---|---|
| Type | Portable Generator |
| Power Output | 30 kW |
| Starting System | Electric Start |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Fuel Type | Gasoline / LPG |
| Running Watts (LPG) | 25, 000 watts |
| Running Watts (Natural Gas) | 24, 000 watts |
| Engine Displacement | 3.0 L |
| Running Watts (Gasoline) | 30 kW |
Warnings and procedures to prevent accidental generator set startup.
Precautions for handling fuel, preventing fires, and exhaust system hazards.
Safety regarding gas fuels, noise levels, and electrical dangers.
Safety for connections, compartments, operating set, and hot parts.
Hazards associated with battery acid, gases, and explosion risks.
Safe practices for welding, grounding, and disconnecting loads.
Requirements for generator set location and CO warnings.
Essential checks before starting and associated safety warnings.
Instructions for exercising the generator and basic startup modes.
How the generator operates automatically with RXT and other ATS.
Description of exercise modes and diagnostic checks performed.
Procedures for identifying, correcting, and resetting faults.
Table listing fault messages, conditions, and checks for various faults.
Sequence of ATS operation and programmed time delays.
Introduction to the RDC2 controller, its components, and features.
Description of controller buttons, LEDs, and their functions.
How the LCD display shows status, faults, and system information.
Overview of the controller's menu structure and navigation.
Viewing generator voltage/frequency and calibration procedures.
Safety warnings and general guidelines for performing maintenance.
Table outlining maintenance tasks, frequency, and procedures.
Common problems, causes, and corrective actions for generator sets.
Identifying fault messages and understanding circuit protection.
To Next Page
