Kohler 38RCLC

TP-6905 9/21 43Section 3 RDC2 Controller Operation
3.16 Date and Time Menu
The date and time will typically be set at controller
power-up. To change the date, time, or time format
(12 hour or 24 hour), use the Date and Time menu.
See Figure 3-16.
3.17 Networking Information Menus
Use the networking menus to view and adjust
communication settings for systems with remote RBUS
devices such as a PIM or load management device, and
for systems that use the Kohlerr OnCuer Plus Home
Generator Management System. RBUS is a proprietary
RS-485 communication protocol.
The Networking Information menu leads to submenus
for network and RBUS communication settings. See
Figure 3-17.
tp6810
Date:
02Dec2014
Time:
12:34pm
Time Format:
12hr|24hr
Date and
Time
<- - Return
To change the date and time, press the Select button
See Figure 3-6 for instructions.
Figure 3-16 Date and Time Menu
tp6810
Networking- - >
Information
Networking- - >
Status
NS
RBUS - - >
Information
RB
<- - Return
Networking- - >
Configuration
NC
See Figure 3-18.
See Figure 3-19.
See Figure 3-20.
Figure 3-17 Networking Information Menu