TT-1602 5/16
9
9. Corner Cover Installation
GM86016-
1. Corner cover (GM86036 qty. 4) and pan head machined
screws (M965A-06020-20 qty. 12)
1
Figure 15 Corner Covers
9.1 Position the corner covers (GM86036 qty. 4) as
shown in Figure 15 using 3 pan head machined
screws (M965A-06020-20) per corner cover.
10. Install the roofs.
GM86016-
1. Alternator roof (GM86103 or GM88915)
2. Engine roof (GM86097 or GM88898)
1
2
Figure 16 Roofs
10.1 Position the alternator roof (GM86103 or
GM88915) and engine roof (GM86097 or
GM88898) onto the sound enclosure as shown in
Figure 16.
Attach the alternator roof to the mounting brackets
in the top rail and secure using four wing nuts
(X-276-9). See Figure 14 for more detail.
Attach the engine roof to the mounting brackets in
the top rail and secure using three wing nuts
(X-276-9). See Figure 14 for more detail.
Note: Final tighten all hardware.
To Next Page
Loading...
