Why is oil leaking from the seals and gaskets of my Kohler Command PRO CH26 Crankshaft engine?
Oil leaks from the seals and gaskets of your Kohler Crankshaft engine can be attributed to: * A clogged or inoperative crankcase breather. * A broken breather reed. * Loose or improperly torqued fasteners. * Piston blowby or leaky valves. * Restricted exhaust.
What to do if Kohler Crankshaft lacks power?
If your Kohler Crankshaft lacks power, it is recommended to have a Kohler authorized dealer service or replace major engine components.
What to do if Kohler Crankshaft stops suddenly?
If your Kohler Crankshaft stops suddenly, service or replace major engine components only by a Kohler authorized dealer.
What to do if my Kohler Command PRO CH26 engine cranks but won't start?
If your Kohler Crankshaft engine cranks but doesn't start, several issues could be the cause. Here are some things to check: * Make sure the fuel tank isn't empty. * Ensure the fuel shut-off valve is open. * Poor fuel, dirt, or water in the fuel system. * Check for a clogged fuel line. * Verify the spark plug leads are connected. * Confirm the key switch or kill switch isn't in the “off” position. * Inspect for faulty spark plugs or ignition modules. * Check for SMART-SPARK™ malfunction (on applicable models) or a carburetor solenoid malfunction. * Look for a failed diode in the wiring harness, a malfunctioning vacuum fuel pump, or oil in the vacuum hose. * See if the vacuum hose to the fuel pump is leaking or cracked. * Ensure the battery isn't connected backward a...
General| Fuel Type | Gasoline |
|---|---|
| Cooling System | Air-cooled |
| Compression Ratio | 8.5:1 |
| Crankshaft Orientation | Horizontal |
| Engine Type | OHV |
| Starting System | Electric start |
To Next Page