Kohler Command PRO ECH650 - Install Throttle Control Panel

10.22
Section 10
Reassembly
Figure 10-80. Connecting Governor Spring to
Governor Lever.
Figure 10-78. Throttle Bushing, Linkage, and
Spring Locations.
Install Throttle Control Panel
1. Secure the thro le control panel to the crankcase
with the four thread forming screws. See Figure
10-79.
NOTE: A detailed view of the thro le control
panel assembly is provided in Figure 10-81
to identify the various parts and aid in
reassembly.
Mounting
Mounting
Screws
Screws
Figure 10-79. Throttle Control Panel Hardware
Location.
2. A ach governor spring to the previously marked
hole on the governor lever. See Figure 10-80.
Item Description
1 Bracket, speed control
2 Clamp, cable
3 Lever, throttle control (top)
4 Lever, throttle actuator (bottom)
5 Screw, M5x0.8x20
6 Washer, spring
7 Washer, fl at (2)
8 Spring, return
9 Nut, M5x0.8 lock
1
1
2
2
3
4
4
5
5
9
8
7
6
Throttle
Throttle
Linkage
Linkage
Spring
Spring
Throttle
Throttle
Linkage
Linkage
Throttle
Throttle
Linkage
Linkage
Bushing
Bushing
Throttle Control Panel Assembly
Detail
2. Make sure the thro le linkage, linkage spring,
and black linkage bushing are connected to the
governor lever and to the thro le lever on the
thro le body. See Figure 10-78.
Figure 10-81. Throttle Control Panel Detail.