Kohler Command PRO ECV940 User Manual

62 590 12 Rev. B
KohlerEngines.com
Owner's Manual
ECV940 & ECV980
IMPORTANT: Read all safety precautions and instructions carefully before
operating equipment. Refer to operating instruction of
equipment that this engine powers.
Ensure engine is stopped and level before performing any
maintenance or service.
Warranty coverage as outlined in warranty card and on
KohlerEngines.com. Please review carefully as it provides you
specifi c rights and obligations.
To maintain compliance with applicable emission regulations,
exhaust system backpressure may not exceed limits which can
be found on KohlerEngines.com. Search by Model No., select
Read More, then select Specs tab.
Record engine information to reference when ordering parts or obtaining warranty coverage.
Engine Model
Specifi cation
Serial Number
Purchase Date

Kohler Command PRO ECV940 Specifications

General

Fuel Type	Gasoline
Fuel System	Carburetor
Ignition System	Electronic
Spark Plug Gap	0.76 mm (0.030 in.)
Governor Type	Mechanical
Horsepower (Max)	22.5 hp (16.8 kW) at 3600 rpm
Lubrication System	Full Pressure

Summary

Owner's Manual Introduction and Safety

Important Safety and Operating Instructions

Read all safety precautions and operating instructions carefully before using the engine.

Detailed Safety Precautions

Explosive Fuel Hazards

Warning about fire and severe burns from gasoline, including safe storage and handling.

Carbon Monoxide Poisoning Risk

Warning about odorless, colorless exhaust gas that can cause death if inhaled.

Accidental Engine Start Dangers

Warning that unexpected engine starts can cause severe injury or death; disable before servicing.

High-Pressure Fluid Injection Hazards

Caution regarding fluid injection injuries from fuel systems, requiring immediate medical attention.

Rotating Parts Injury Risks

Warning to stay away from moving parts to prevent severe injury while the engine is operating.

Hot Surface Burn Hazards

Warning about severe burns from touching hot engine parts during or after operation.

Electrical Shock Hazard Warning

Caution about potential injury from touching wires while the engine is running.

Engine Operation Procedures

Pre-Start Checklist

Steps to perform before starting the engine, including checking oil, fuel, and cooling areas.

Engine Starting Steps

Instructions for starting the engine, including throttle and key switch operation.

Cold Weather Starting Tips

Engine Stopping Steps

Steps to properly shut down the engine, including disengaging loads and closing fuel valve.

Maximum Operating Angle Limits

Troubleshooting and Engine Specs

Troubleshooting Common Engine Issues

Key Engine Specifications Data