Kohler Courage SV710 User Manual

8
Specifi cations
KohlerEngines.com 32 690 01 Rev. G
TORQUE SPECIFICATIONS
3,5
SV710
SV810
SV715 SV720
SV820
SV725 SV730
SV830
SV735 SV740
SV840
Cylinder Head
Head Bolt Fastener (torque in 2 increments) fi rst to 22.6 N·m (200 in. lb.)
fi nally to 41.8 N·m (370 in. lb.)
Rocker Arm Screw 11.3 N·m (100 in. lb.)
Rocker Arm Stud (AVT) 11.3 N·m (100 in. lb.)
Rocker Arm/Valve Adjustment Jam Nut 7.3 N·m (65 in. lb.)
Rocker Arm/Valve Adjustment Setscrew (AVT) 7.9 N·m (70 in. lb.)
Flywheel
Retaining Screw 74.5 N·m (55 ft. lb.)
Fuel Pump
Screw 2.3 N·m (20 in. lb.)
Governor
Lever Nut 6.8 N·m (60 in. lb.)
Ignition
Spark Plug 27 N·m (20 ft. lb.)
Module Fastener 4.0-6.2 N·m (35-55 in. lb.)
Rectifi er-Regulator Fastener 4.0 N·m (35 in. lb.)
Intake Manifold
Mounting Fastener (torque in 2 increments) fi rst to 7.4 N·m (66 in. lb.)
fi nally to 9.9 N·m (88 in. lb.)
Muffl er
M8 Hex Nuts 24.4 N·m (216 in. lb.)
5/16-18 Capscrew 16.9 N·m (150 in. lb.)
Bracket Screw 9.9 N·m (88 in. lb.)
Oil Filter
Nipple (Style A Oil Pan only) 33.9 N·m (300 in. lb.)
Oil Pan
Fastener 24.4 N·m (216 in. lb.)
Oil Pump
Oil Pump Style A
Screw (torque in 2 increments) 11.2 N·m (11 in. lb.) into new hole
7.3 N·m (65 in. lb.) into used holes
Oil Pump Style B
Screw (no torque sequence) 9.0 N·m (80 in. lb.)
3
Values are in Metric units. Values in parentheses are English equivalents.
5
Lubricate threads with engine oil prior to assembly.

Kohler Courage SV710 Specifications

General

Compression Ratio	8.5:1
Cooling System	Air-cooled
Fuel System	Carburetor
Displacement	725 cc
Fuel Type	Unleaded Gasoline
Ignition System	Electronic
Starter	Electric
Weight	85 lbs