To Next PageTo Next Page
Need help?Do you have a question about the Kohler Courage SV725 and is the answer not in the manual?
General| Displacement | 725 cc |
|---|---|
| Power | 22 hp |
| Compression Ratio | 8.5:1 |
| Cooling System | Air-cooled |
| Starter Type | Electric |
| Fuel System | Carburetor |
| Governor Type | Mechanical |
| Bore | 3.27 inches |
| Fuel Type | Unleaded Gasoline |
| Oil Capacity | 2.0 quarts |
| Stroke | 2.68 inches (68 mm) |
Read all safety precautions and instructions carefully before operating equipment. Refer to equipment manual.
Ensure engine is stopped and level before performing any maintenance or service.
Review warranty coverage, rights, and obligations on KohlerEngines.com.
Record engine model, serial number, and purchase date for reference.
Covers fuel flammability, carbon monoxide poisoning, hot parts, and electrical shock hazards.
Addresses preventing accidental starts, keeping clear of rotating parts, and safe servicing.
Includes California Proposition 65 notice regarding engine exhaust chemicals.
Includes checks for oil level, fuel system, cooling areas, component security, and spark arrestor.
Covers engine start/stop procedures, angle limits, and speed control.
Addresses high altitude operation and tips for cold weather starting.
Lists recommended service intervals for air cleaner, oil, filter, and spark plugs.
Guidelines for choosing the correct oil viscosity based on air temperature.
Detailed steps for accurately checking the engine oil level using the dipstick.
Details oil/filter changes, fuel requirements, and fuel line compliance.
Explains the purpose of the Oil Sentry switch for low oil protection.
Procedures for servicing spark plugs and air cleaner components.
Covers engine cooling, breather tube, and long-term storage preparation.
Recommends using Kohler authorized dealers for all repair and service needs.
Table linking common engine problems to their potential causes like fuel, oil, or debris.
Lists key specifications like bore, stroke, displacement, oil capacity, and operating angles.
