EasyManua.ls Logo

Kohler Decision-Makerr 3500 User Manual

Kohler Decision-Makerr 3500
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TT-1625 7/17c
INSTALLATION INSTRUCTIONS
Original Issue Date: 3/14
Model:
Generator Sets with APM802 Controller; Decision-Makerr 3+, 550, 3000,
3500, 6000, and 8000 Controllers; and KPC 1000 Controller
Transfer Switches with Decision-Makerr MPAC 750, 1000, 1200, and 1500
Controllers
Market: Industrial
Subject: Remote Serial Annunciator (RSA III) Kits (Firmware Version 1.0)
Introduction
RSA III is an annunciator panel offered in several kit
configurations to support Kohler power equipment. The
RSA III is a remote serial annunciator (Figure 1,
Figure 2, and Figure 3) that monitors the condition of
the generator set and/or ATS from a remote location.
The RSA III alerts the operator through visual and
audible signals using LED indication and a horn. An
alarm silence and lamp test switch are included.
The RSA III meets NFPA 110, Level 1 applications that
require remote controls and alarms be powered by a
storage battery such as the engine starting battery. AC
adaptor kit GM62466-KP1 is available when NFPA is
not required.
The front panel decals include areas that can be used to
identify user-selected fault inputs and identify
associated power system equipment.
Figure 1 Remote Serial Annunciator (RSA III)
An RSA III annunciator can be used for a single
generator set (Figure 1) or with a combination of a
generator set and automatic transfer switch(es)
(Figure 2 or Figure 3). In systems using more than a
single RSA III, one must be designated as the master
device to broadcast to additional RSA III annunciators,
designated as slave devices. Up to five RSA III slave
devices can be used with an RSA III master device. All
RSA III annunciators are factory set as the master
device, but can be changed to a slave device using a PC
and SiteTecht software that connects to the RSA III
front panel via a universal serial bus (USB) connection.
The RSA II can be connected with the RSA III provided
that the master remote annunciator is an RSA III.
Figure 2 RSA III with Single ATS Control
Figure 3 RSA III with Four ATS Controls

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Kohler Decision-Makerr 3500 and is the answer not in the manual?

Kohler Decision-Makerr 3500 Specifications

General IconGeneral
PhaseSingle
Output Power3500 W
Frequency60 Hz
Engine Speed3600 RPM
Fuel TypeGasoline
Voltage120/240V
Amperage29.2A at 120V, 14.6A at 240V
Noise Level68 dBA

Summary

Installation Instructions

Introduction to RSA III Annunciator

Overview of the RSA III annunciator panel, its purpose, and basic functionality.

RSA III Key Features and Controls

Details on alarm horn, silence, lamp test, keyswitch, and LED indicators.

RSA III Physical Installation Guide

Steps for preparing the site, mounting the RSA III box, and final assembly.

RSA III Wiring and Connections Guide

Guide for wiring the RSA III to controllers and other devices using various protocols.

Controller and SiteTech Software Configuration

Configuring controllers and using SiteTech software for RSA III setup.

RSA III Kit Components and Parts List

Detailed list of parts included in various RSA III kits and related accessories.

Related product manuals