Kohler Intelligent Toilet - Cleaning or Replacing Filters

Cleaning or Replacing the Filters
Disconnect the power to the toilet.
Turn off the water by closing the water supply stop.
Remove the right side panel.
Turn off the power to the toilet by flipping the internal switch.
Remove the filters and inspect them for damage.
If the filters are damaged, replace them.
If the filters are clogged, remove all debris.
Install the filters.
Turn on the power to the toilet by flipping the internal switch.
Reattach the right side panel.
Open the supply stop.
Reconnect the power to the toilet.
Filter
Power
Switch
Kohler Co. 11 1295780-5-A
PROOF