Adjusting Resonance
Your bath is equipped with six transducers. When the bath is filled with water, two transducers are
positioned above the waterline, and four are located below the waterline.
Follow the steps below to adjust transducer intensity.
Resonance Above Water
This function enables the adjustment of the above water sound resonance for all experiences.
While an experience is running, touch the minus [-] or the plus [+] icon above the indicator bars to
adjust resonance intensity coming from the transducers located near the top of the bath.
Touch the minus [-] icon to decrease intensity, or the plus [+] icon to increase intensity.
Resonance Below Water
This function enables the adjustment of the below water sound resonance for all experiences.
While an experience is running, touch the minus [-] or the plus [+] icon below the indicator bars to
adjust resonance intensity coming from the transducers located near the bottom of the bath.
Touch the minus [-] icon to decrease intensity, or the plus [+] icon to increase intensity.
Mute
This function mutes the combination of sound and vibrations coming from the transducers.
Touch the [Mute] icon to turn sound resonance ON or OFF. The icon and brackets will illuminate
when MUTE is ON.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
•
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
•
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and
dry any overspray that lands on nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
Adjust Resonance Above Water
Adjust Resonance Below Water
Experience
Aux
Mute
Home
Kohler Co. 11 1181168-5-A
To Next Page
Loading...
Need help?
General