Your Vibracoustic Bath
Your vibracoustic bath is designed to provide a relaxing resonating surround sound experience. The bath is
equipped with the following components:
Bath – Allows the bather to relax in comfort while enjoying the vibracoustic experience.
User Interface – Located within easy reach, the interface allows you to turn the unit ON and OFF. It
also enables you to select experiences and regulate the resonance intensity and chromatherapy
lighting (if equipped). The interface also allows you to select an auxiliary music source (if
connected).
Chromatherapy Lights (if equipped) – Add ambience to your bath with a continuous cycle through
eight colors, or you can set the lighting to a specific color.
Transducers – Components through which the vibracoustic pulses are transferred to the bath. When
the bath is filled with water, two transducers are positioned above the waterline, and four are
located below the waterline.
Control Amplifier – Provides power to the transducers and chromatherapy lighting (if equipped) to
create soothing or exhilarating vibracoustic experiences. The control also contains a port to connect
an optional auxiliary music source.
Your bath offers several distinct vibracoustic experiences:
″Awakening,″″Solitude,″″Transcendence,″″Letting Go,″″Toms,″ and ″Up Down″ – six custom
experiences combining sound and vibrations designed to relax or invigorate your mind and body.
The sound resonance and lighting color can be adjusted for each experience as desired. Refer to the
″Adjusting Resonance″ and ″Chromatherapy Options″ sections.
Transducer
Wires
User Interface
Control
Amplifier
Chromatherapy Light
(If Equipped)
Transducer
1181168-5-A 4 Kohler Co.
To Next Page
Loading...
Need help?
General