1004636-2-A
2
Kohler Co.
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
- Shut off the main water supply.
- Observe all local plumbing codes.
- If possible, install this faucet before installing the sink.
- If the supply tubes must be cut, allow for required penetration into
the shut-off valve.
- The escutcheon nut from the handle kit is required for installation.
- Inspect the supply lines for damage. Replace as necessary.
- Kohler reserves the right to make revisions in the design of faucets
without notice, as specified in the price book.
Tools and Materials
Plumbers
Putty
Adjustable Wrench
Thread
Sealant
Tube Cutter
To Next Page
Loading...
Need help?
General
