EasyManua.ls Logo

Kohler KDI Series

Kohler KDI Series
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
2
_07ED0053029590
TECHNICAL INFORMATION
Tab. 2.6
Battery not supplied by Kohler
2.7 Battery features
2.6 Coolant
TECHNICAL SPECIFICATIONS
50% ETHYLENEGLYCOL and 50% DECALCIFIED WATER
50% PROPYLENE GLYCOL and 50% DECALCIFIED WATER
2.5.3 Emission-Related Installation Instructions
Failing to follow the instructions in the applications guidebook
when installing a certied engine in a piece of nonroad
equipment violates federal law (40 CFR 1068.105(b)), subject
to nes or other penalties as described in the Clean Air Act.
OEM must apply a separate label with the following statement:
ULTRA LOW SULFUR FUEL ONLY” near the fuel inlet.
Ensure you are installing an engine appropriately certied for
your application. Constant speed engines may only be installed
on constant speed equipment for constant speed operation.
If you install the engine in a way that makes the engine's
emission control information label hard to read during normal
engine maintenance, you must place a duplicate label on the
equipment, as described in 40 CFR 1068.105.
Tab. 2.7
RECOMMENDED BATTERIES
AMBIENT TEMPERATURE BATTERY TYPE
≥ - 15°C 100 Ah - 800 CCA/SAE
< -15°C 120 Ah - 1000 CCA/SAE

Related product manuals