Kohler KDI Series

60
2
_07
Fig. 2.61
Fig. 2.69
ED0053029590
TECHNICAL INFORMATION
2.19.4 Installation instructions
1 - Remove the cap guards with care only when
assembling.
Handle carefully avoiding erratic movements.
2.19.5 Replacement instructions
Always understand the cause of the breakage of the
turbocharger before replacing it.
Correct the cause of the breakage before replacing it with a
new turbocharger.
If in doubt, contact KOHLER service department.
Important
• Failure to comply with these instructions can cause damage
to the turbocharger and void the warranty.
• Modifying the calibration of the turbocharger damages the
turbocharger/engine.
• Always use the correct gaskets, and fit carefully to avoid
blocking holes when mounting.
• Refer to the manual of the engine / vehicle, for: the correct
type and quantity of oil, the correct tightening of components,
instructions and installation.
• It is forbidden to use liquid gaskets or sealants, particularly
for the oil inlet/outlet.
• Avoid dirt / debris while installing the turbocharger.
• Before mounting the turbocharger, check that the code of the
component is correct for the type of engine, as mounting the
wrong turbocharger can damage the turbo / engine and void
the warranty.