Kohler PATIO Series - Page 6

1070157-T01-E
B.
B.
Install hook
Drill 2 mounting holes on the wall and install hook. Fix hook
on the wall by tightening screws.
-6-
Supply Pipe
C.
C.
Install the inlet hose of valve assy.
Take out the bracket of valve assy. Install the limited board (1).
Tighten the tighten screw (2).The inserting depth postion is
shown
Connect the inlet pipe with the water supply on the wall.
(1) (2)
(3)
as (3).
Limited Board
Tighten Screw
Bracket of Valve Assy.
(1)
Bracket of Valve
Tighten Screw
(2)
(3)
(600~700)
180