Kohler RDC2 Manual

TP-7092 8/18 29Section 3 RDC2 Controller Operation
Section 3 RDC2 Controller Operation
3.1 RDC2 Generator Set/Transfer
Switch Controller
Model RCA and RCAL generator sets are equipped with
the RDC2 generator set/transfer switch controller. See
Figure 3-1 for controller illustrations.
The RDC2 controls the following power system
components:
D Model RCA or RCAL generator set
D Model RXT Automatic Transfer Switch (ATS)
D Load management device
D Programmable Interface Module (PIM)
The RDC2 controller features include:
D Two-line x 16 character backlit digital display with
adjustable contrast
D OFF, AUTO, and RUN generator set master control
buttons
D Generator set status indicating LEDs (OFF, AUTO,
RUN)
D Up, Down, and Select buttons for navigation through
menus and adjustments
D Power system indicator LEDs to show utility and
generator source status, and to show which source
(utility or generator) is supplying power to the load
(Model RXT automatic transfer switch is required for
operation of these LEDs.)
3.2 Controls and In dicators
Figure 3-1 illustrates the RDC2 controller. See
Figure 3-2 for details of the controller’s user interface.
1. User Interface; see Figure 3-2
1
GM90304
Figure 3-1 RDC2 Controls and Indicators
9
1. 2-line LCD display
2. Up button
3. Select button
4. Down button
5. RUN button and LED
6. Generator power available LED*
7. Building on generator power LED*
8. Building on utility power LED*
9. Utility power available LED*
10. OFF button and LED
11. AUTO button and LED
* These LEDs operate only if a Model RXT automatic transfer
switch is connected.
1
10
3
2
5
11
4
GM77569
687
Figure 3-2 RDC2 User Interface

Kohler RDC2 Specifications

General

Brand	Kohler
Model	RDC2
Category	Portable Generator
Language	English